Used Equipment For Sale

These items have served me well but are now looking for a new home. In good-excellent condition except as noted.
Item
Price each
Quantity

Lighting package

  • 16 Source 4 PARs (575 watt version)
  • 2 Leprecon LD360DMX-HP 6-channel dimmers
  • Leprecon LP612 12-channel controller
  • 2 Frames for 8 Source 4 PARs plus dimmer
  • 2 International CS-15 15' crank-up stands
  • One 100' and one 50' DMX cable
  • Special 20' DMX cable delivers power to controller
  • Complete set of lenses for each light: flat, narrow spot, medium flood, wide flood
  • Gell frames
  • Assortment of gels
  • 2-3 spare lamps

This is a small light system designed for simple front lights on smaller stages. Lights and dimmers are mounted to frames and prewired for quick setup.

Power to dimmers is currently via NEMA L14-30 (20 amps x2 per dimmer required) but can be converted back to dual Edison connections.

LP612 controller has been modified to run power down pinds 4 and 5 of a DMX cable. Wall wart connects to an adapter at the end of a 20' DMX cable.

Dimmers were modifited for slow start to prevent breaker trips (a real pain when they are 15' in the air)

3,000 1

Custom drive snake

  • 150' 20-channel main trunk with W2s at each end
  • 3' W2 to xlr fan
  • breakout box
    • W2 for FOH main input
    • 6-channel input from monitor board
    • 2 W1 outputs for speaker drive
    • XLR connectors for 8 lines from FOH
  • 2 100' 9-pair cables W1 to amp racks or powered speaker stacks

Currently, 6 lines from FOH are routed directly to each of the "stack" cables. 8 lines from FOH terminate at XLR connectors on the breakout box. One line is dedicated to intercom, another to DMX.

All interconnections can be easily modified in the breakout box.

Whilrwind originally built this snake. It has been modified several times to support system changes.

2,000
obo
1
4-space rack drawer 50 1
3-space rack drawer 50 1
2-space rack shelf

40

1
Rack-mount power conditioner with lights

40

1

Speaker cables
  • 25' 1/4 to 1/4 #12
  • 30' 1/4 to 1/4 #10
  • 30' 1/4 to 1/4 #14 (rubber covered)
  • 15' 1/4 to 1/4 #14 (rubber covered)
  • 15' 1/4 to NL4 Speakon #12
  • Amp breakout panel (1 space)
    • 4 circuits
    • Two 1/4" outputs per circuit
    • Banana amp connection

all of the above

 






 

 

100


8
3
3
1
2
1

Short tripod mic stand - silver (KMD 6529)
15
5

Prices are US $. Tax and shipping are not included.

Home